1.      Zhao L, Wang B,Wang R, Yang Z. Aero-thermal behavior and performance optimization ofrectangular finned elliptical heat exchangers with different tubearrangements[J]. International Journal of Heat and Mass Transfer, 2019, 133:1196-1218. SCI

2.      Zhou Z, Xia C,Shan X, Yang Z. The Impact of Bogie Sections on the Wake Dynamics of aHigh-Speed Train[J]. Flow, Turbulence and Combustion, 2019: 1-25. SCI

3.      Zhong L, Li Q,Wang Y, Yang Z. Aerodynamic noise prediction of passenger vehicle with hybriddetached eddy simulation/acoustic perturbation equation method[J]. Proceedingsof the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering,2019, 233(10): 2390-2404. SCI

4.      Li Q, Dai W,Yang Z, et al. Investigation on aerodynamic characteristics of tailing vehiclehood in a two-vehicle platoon[J]. Proceedings of the Institution of MechanicalEngineers, Part D: Journal of Automobile Engineering, 2019: 0954407019857430. SCI

5.      He Y, Andonov AA, Shi Z, Blumrich R, Yang Z, Wiedemann J. Flow-induced vibration analysis of avehicle's front side window glass[J]. Journal of Vibration and Control, 2019,25(8): 1411-1423. SCI

6.      Du X, Yang Z,Jin Z, Zhu Y, Zhou, Z. A theoretical and experimental study of typicalheterogeneous ice nucleation process on auto windshield under nocturnalradiative cooling and subfreezing conditions[J]. International Journal of Heatand Mass Transfer, 2019, 136: 610-626. SCI

7.      Wang H, Shan X,Yang Z. Experimental investigation on air-side flow-field and water-side heatexchange performance of radiator based on matrix fans[J]. Proceedings of theInstitution of Mechanical Engineers, Part D: Journal of Automobile Engineering,2019, 233(4): 824-835. SCI

8.      Wang B, Yang Z,Zhu H. Active flow control on the 25° Ahmed body using a new unsteady jet[J].International Journal of Heat and Fluid Flow, 2019, 79: 108459. SCI

9.      Wang B, Yang Z,Zhu H. Drag reduction on the 25° Ahmed body using a new zero-net-mass-flux flowcontrol method[J]. Theoretical and Computational Fluid Dynamics, 2019, 33(5):411-431. SCI

10.  周华,杨志刚,朱晖.基于整车风洞试验的MIRA车型数值计算[J].吉林大学学报(工学版),2019,49(04):1043-1053. EI

11.  王冰心,杨志刚,朱晖.类车体尾迹流动非定常特性[J].同济大学学报(自然科学版),2019,47(01):113-123. EI

12.  赵兰萍,王仁杰,刘桂兰,杨志刚.平行流蒸发器制冷剂流量分配特性[J].同济大学学报(自然科学版),2019,47(02):261-268+274. EI

13.  袁海东,杨志刚,单希壮,李启良.类后视镜钝体尾迹分析[J].湖南大学学报(自然科学版),2019,46(02):28-35. EI

14.  杨志刚,徐鑫,赵兰萍,林赵敏.冬季夜间乘员舱内热环境及人体热舒适性研究[J].同济大学学报(自然科学版),2019,47(03):408-413. EI

15.  赵兰萍,江从喜,徐鑫,杨志刚.整车运行环境下油冷对外转子轮毂电机温度特性的影响[J].汽车工程,2019,41(04):373-380. EI

16.  杨志刚,毛懋,陈羽.高速列车底部结构参数对气动阻力作用规律[J].同济大学学报(自然科学版),2019,47(07):1055-1064. EI

17.  李启良,杜文海,王毅刚,杨志刚.基于主动射流的汽车后视镜区域气动噪声控制[J].同济大学学报(自然科学版),2019,47(08):1195-1200. EI

18.  袁海东,杨志刚,李启良.汽车前侧窗表面压力激励及其源分析[J].湖南大学学报(自然科学版),2019,46(08):9-19. EI

19.  贾青,黄磊,鞠树彬,杨志刚.阻塞比对开口式风洞喷口风速测量方法的影响[J].同济大学学报(自然科学版):1-7[2019-12-02]. EI

20.  Yan G, Xia C,Zhou H, Zhu H, Yang Z. Experimental Investigation of the Bi-Stable Behavior inthe Wake of a Notchback MIRA Model[C]. SAE Technical Paper, 2019-01-0663. EI

21.  杨志刚,刘洋,王毅刚.有限长圆柱绕流气动噪声源特性分析[J].声学技术,2019,38(01):5-14.

22.  陈伟,秦仙蓉,杨志刚,詹澎明.塔式起重机整机风场模拟下的风载荷特性分析[J].机械设计,2019,36(02):19-26.

23.  王毅刚,陈垂文,黄晓胜,焦燕,杨志刚.圆柱绕流近壁面处气动噪声源识别研究[J].声学技术,2019,38(04):422-427.